АККУМУЛЯТОРНАЯ БАТАРЕЯ ГИБРИДНОЙ СИСТЕМЫ, Diagnostic DTC:P3011-123, P3012-123, P3013-123, P3014-123, P3015-123, P3016-123, P3017-123, P3018-123, P3019-123, P3020-123, P3021-123, P3022-123, P3023-123, P3024-123, P3025-123, P3026-123

DTC Code DTC Name
P3011-123 Battery Block 1 Becomes Weak
P3012-123 Battery Block 2 Becomes Weak
P3013-123 Battery Block 3 Becomes Weak
P3014-123 Battery Block 4 Becomes Weak
P3015-123 Battery Block 5 Becomes Weak
P3016-123 Battery Block 6 Becomes Weak
P3017-123 Battery Block 7 Becomes Weak
P3018-123 Battery Block 8 Becomes Weak
P3019-123 Battery Block 9 Becomes Weak
P3020-123 Battery Block 10 Becomes Weak
P3021-123 Battery Block 11 Becomes Weak
P3022-123 Battery Block 12 Becomes Weak
P3023-123 Battery Block 13 Becomes Weak
P3024-123 Battery Block 14 Becomes Weak
P3025-123 Battery Block 15 Becomes Weak
P3026-123 Battery Block 16 Becomes Weak

DESCRIPTION


DTC No. DTC Detection Condition Trouble Area
P3011-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3012-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3013-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3014-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3015-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3016-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3017-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3018-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor

  • Service Plug Grip
P3019-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3020-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3021-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3022-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3023-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3024-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3025-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor
P3026-123 An internal malfunction of the HV battery is detected and the difference in voltage between each battery block or the internal resistance of each battery block is higher than the specified value. (1 trip detection logic)

  • HV battery

  • Battery voltage sensor

Tech Tips


  • These DTCs can be stored after clearing DTCs and driving the vehicle for approximately 10 minutes.

  • These DTCs are stored when a malfunction is detected in the HV battery or a battery voltage sensor. However, depending on the driving conditions, the malfunction may not be reproduced if the status of the HV battery changes. If internal resistance is abnormal, the voltage of the battery blocks indicated by the DTCs are likely to decrease more than others blocks voltage during acceleration (discharging), and increase more during deceleration (charging).


    1. When the HV battery is malfunctioning:


      • - Voltage of 1 or more of the battery blocks has dropped.

      • - Voltage of all battery blocks is output randomly with no certain pattern.


    1. When the battery voltage sensor is malfunctioning:


      • - Differences in battery block voltages have a certain pattern.

Related Data List
DTC No. Data List

  • P3011-123

  • P3012-123

  • P3013-123

  • P3014-123

  • P3015-123

  • P3016-123

  • P3017-123

  • P3018-123

  • P3019-123

  • P3020-123

  • P3021-123

  • P3022-123

  • P3023-123

  • P3024-123

  • P3025-123

  • P3026-123

  • Internal Resistance R01 to R16

  • Battery Block Vol -V01 to V16

  • State of Charge (All Bat)

INSPECTION PROCEDURE

CAUTION:

When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.

Tech Tips

After the repair, clear the DTCs, perform the following operations, and check that no DTCs are output.


  1. Drive the vehicle on urban roads for approximately 10 minutes. (This DTC may not be stored if the vehicle is stopped or being driven at a constant speed)

PROCEDURE


  1. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Read output DTCs.

      Result
      Result Proceed to
      P0AFC-123 is not output. A
      P0AFC-123 is also output. B

    5. Turn the power switch off.


    B

    GO TO DTC CHART (P0AFC-123) Click here

    A

  2. READ VALUE USING GTS (VB01 - VB16)


    1. Ensure the safety of the areas in front and at the back of the vehicle.

    2. Apply the parking brake and secure the wheels using chocks.

    3. Connect the GTS to the DLC3.

    4. Turn the power switch on (READY).

    5. Fully warm up the engine and turn the air conditioning off.

    6. Enter the following menus: Powertrain / Hybrid Control / Data List / Battery Block Vol -V01 to V16.

    7. Firmly depress the brake pedal with your left foot.

    8. Move the shift lever to D.

    9. Record each battery block voltage from the Data List "Battery Block Vol -V01 to V16" while fully depressing the accelerator pedal.

    10. Compare the battery block voltages "Battery Block Vol -V01 to V16" between the even and odd number groups in each combination shown in the table below.

      Table 1
      Circuit A Battery Block Circuit B Battery Block Condition
      Battery Block Vol - V01 (VB1) Battery Block Vol - V02 (VB2) "Battery Block Vol - V01" - "Battery Block Vol - V02" = 0.3 V or more
      Battery Block Vol - V04 (VB4) Battery Block Vol - V03 (VB3) "Battery Block Vol - V04" - "Battery Block Vol - V03" = 0.3 V or more
      Battery Block Vol - V05 (VB5) Battery Block Vol - V06 (VB6) "Battery Block Vol - V05" - "Battery Block Vol - V06" = 0.3 V or more
      Battery Block Vol - V08 (VB8) Battery Block Vol - V07 (VB7) "Battery Block Vol - V08" - "Battery Block Vol - V07" = 0.3 V or more
      Battery Block Vol - V09 (VB9) Battery Block Vol - V10 (VB10) "Battery Block Vol - V09" - "Battery Block Vol - V10" = 0.3 V or more
      Battery Block Vol - V12 (VB12) Battery Block Vol - V11 (VB11) "Battery Block Vol - V12" - "Battery Block Vol - V11" = 0.3 V or more
      Battery Block Vol - V13 (VB13) Battery Block Vol - V14 (VB14) "Battery Block Vol - V13" - "Battery Block Vol - V14" = 0.3 V or more
      Battery Block Vol - V16 (VB16) Battery Block Vol - V15 (VB15) "Battery Block Vol - V16" - "Battery Block Vol - V15" = 0.3 V or more
      Table 2
      Circuit A Battery Block Circuit B Battery Block Condition
      Battery Block Vol - V01 (VB1) Battery Block Vol - V02 (VB2) "Battery Block Vol - V02" - "Battery Block Vol - V01" = 0.3 V or more
      Battery Block Vol - V04 (VB4) Battery Block Vol - V03 (VB3) "Battery Block Vol - V03" - "Battery Block Vol - V04" = 0.3 V or more
      Battery Block Vol - V05 (VB5) Battery Block Vol - V06 (VB6) "Battery Block Vol - V06" - "Battery Block Vol - V05" = 0.3 V or more
      Battery Block Vol - V08 (VB8) Battery Block Vol - V07 (VB7) "Battery Block Vol - V07" - "Battery Block Vol - V08" = 0.3 V or more
      Battery Block Vol - V09 (VB9) Battery Block Vol - V10 (VB10) "Battery Block Vol - V10" - "Battery Block Vol - V09" = 0.3 V or more
      Battery Block Vol - V12 (VB12) Battery Block Vol - V11 (VB11) "Battery Block Vol - V11" - "Battery Block Vol - V12" = 0.3 V or more
      Battery Block Vol - V13 (VB13) Battery Block Vol - V14 (VB14) "Battery Block Vol - V14" - "Battery Block Vol - V12" = 0.3 V or more
      Battery Block Vol - V16 (VB16) Battery Block Vol - V15 (VB15) "Battery Block Vol - V15" - "Battery Block Vol - V16" = 0.3 V or more
      A01FVXQE06

      Tech Tips

      When an internal malfunction occurs in the battery voltage sensor, this symptom (difference in voltage of 0.3 V or more for all 8 pairs of blocks) will occur.

      Result
      Result Proceed to
      All conditions in table 1 are met. A
      All conditions in table 2 are met.
      Other than above B

    11. Turn the power switch off.


    B

    CHECK DTC OUTPUT (HYBRID CONTROL) Click here

    A

    REPLACE BATTERY VOLTAGE SENSOR Click here

  3. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Read output DTCs.

      Result
      Result Proceed to
      P3018-123 is not output. A
      P3018-123 is output. B

      Tech Tips

      DTC P3018-123 may also be stored if there is foreign matter, etc. adhering to the connecting part of the service grip.

    5. Turn the power switch off.


    B

    REPLACE HV BATTERY AND SERVICE PLUG GRIP

    A

    REPLACE HV BATTERY Click here