| DTC Code | DTC Name |
|---|---|
| P3147-240 | Transmission system |
| P3147-242 | Transmission system |
DESCRIPTION
Refer to the description for DTC P3147-239 Click here.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P3147-240 | Generator (MG1) locked Generator (MG1) does not rotate when the vehicle is being driven in EV mode. (1 trip detection logic) |
Hybrid vehicle transmission assembly |
| P3147-242 | Planetary gear locked The 3 planetary gears rotate all together, not individually. The planetary gear carrier is seized. (1 trip detection logic) |
Hybrid vehicle transmission assembly |
| DTC No. | Data List |
|---|---|
| P3147-240 |
|
| P3147-240 |
INSPECTION PROCEDURE
Tech Tips
If DTC P3147-240 is output, clear the DTCs, perform the following procedure, and check that the same DTC is not output after the repair.
After DTC P3147-240 has been output, drive the vehicle at approximately 15 km/h (9 mph) or more for approximately 10 seconds or more while maintaining a stable vehicle speed. (If generator (MG1) does not rotate in this condition, DTC P3147-240 will be stored.)
If DTC P3147-242 is output, clear the DTCs, perform the following procedure, and check that the same DTC is not output after the repair.
When the vehicle is stopped, turn the power switch on (READY) and gradually depress the accelerator pedal so that the engine starts.
Drive the vehicle at approximately 20 km/h (12 mph) or more for approximately 10 seconds or more while maintaining the vehicle speed.
PROCEDURE
CHECK DTC OUTPUT (HYBRID CONTROL)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
Turn the power switch off.
| B |
|
GO TO DTC CHART (P0A1D) Click here |
| A |
|
REPLACE HYBRID VEHICLE TRANSMISSION ASSEMBLY Click here