СИСТЕМА УПРАВЛЕНИЯ ГИБРИДНОЙ СИСТЕМОЙ, Diagnostic DTC:P0C30-390

DTC Code DTC Name
P0C30-390 Hybrid Battery Pack State of Charge High

DESCRIPTION

The power management control ECU monitors its internal operation, and it will store DTCs and perform fail-safe control when it detects the following malfunctions.

DTC No. DTC Detection Condition Trouble Area
P0C30-390

Charge control error

Charging of the HV battery continues even after charging is prohibited when the hybrid system is malfunctioning and "State of Charge (All Bat)" has reached the upper limit.

(1 trip detection logic)

 Power management control ECU
Related Data List
DTC No. Data List
P0C30-390

  • State of Charge (All Bat)

  • Charge Control Value

  • Power Resource IB

  • Battery too High Time

INSPECTION PROCEDURE

Tech Tips

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.


  1. When the vehicle is stopped with the power switch on (READY) and the shift lever in D, depress the accelerator pedal. The engine speed will increase as well as "State of Charge (All Bat)".

    If charge current drops, release the accelerator pedal and then depress it again to maintain charging.

  2. Check that charging stops when "State of Charge (All Bat)" reaches the upper limit.

PROCEDURE


  1. CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check for DTCs.

      Result
      Result Proceed to
      P0C30-390 only is output. A
      DTCs except P0C30-390 are output. B

    5. Turn the power switch off.


    B

    GO TO DTC CHART (HYBRID CONTROL SYSTEM) Click here

    A

    REPLACE POWER MANAGEMENT CONTROL ECU Click here