СИСТЕМА УПРАВЛЕНИЯ ГИБРИДНОЙ СИСТЕМОЙ, Diagnostic DTC:P0BCE-313, P0BCF-312
| DTC Code | DTC Name |
|---|---|
| P0BCE-313 | Generator Inverter Temperature Sensor Circuit Low |
| P0BCF-312 | Generator Inverter Temperature Sensor Circuit High |
DESCRIPTION
-
The MG ECU, which is built into in the inverter with converter assembly, detects the temperature of the generator inverter using the temperature sensor built into the inverter with converter assembly. The inverter cooling system operates independently of the engine cooling system. The MG ECU uses signals from the generator inverter temperature sensor to check the effectiveness of the inverter cooling system. If necessary, the MG ECU will limit inverter output to help prevent inverter overheating. The ECU also detects malfunctions in the generator inverter temperature sensor and its wiring.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0BCE-313 | Short to GND in the generator inverter temperature sensor signal circuit (1 trip detection logic) |
Inverter with converter assembly |
| P0BCF-312 | Open or short to +B in the generator inverter temperature sensor signal circuit (1 trip detection logic) |
Inverter with converter assembly |
| DTC No. | Data List |
|---|---|
| P0BCE-313 | Inverter Temp-(MG1) |
| P0BCF-312 |
INSPECTION PROCEDURE
Tech Tips
After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
-
Turn the power switch on (IG) and wait for 5 seconds or more.
