REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

  2. REMOVE REAR FLOOR FINISH PLATE

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM BOX

  4. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH

    Click here

  5. REMOVE REAR BUMPER COVER


    1. A004K5A

      Disconnect the rear light assembly connector.

    2. Disengage the clamp and disconnect the wire harness.

    3. A004JOO

      Disengage the grommet and pull out the wire harness.

    4. A004KU7

      Remove the 2 screws.

    5. A004IE7E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper cover.

    6. A004KXE

      Using a clip remover, remove the 6 clips.

    7. A004JE7

      Remove the clip.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    8. A004HBV

      Disengage the 5 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    9. A004KRN

      Disengage the 3 guides and remove the rear bumper cover.