HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE


  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. A004I4F

      Engage the guide as shown in the illustration.

    2. Install the rear height control sensor sub-assembly LH with the 3 nuts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    3. Connect the connector.

  2. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

    Click here

  3. ADJUST HEADLIGHT AIMING

    Click here