FRONT SIDE MARKER LIGHT BULB INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL FRONT MARKER LIGHT ASSEMBLY


    1. Connect the connector.

    2. Engage the claw to install the front marker light assembly.

    3. Check that the side front marker light assembly is installed securely.

      Tech Tips

      A004JHKE02

      If the front marker light assembly is not installed securely, widen and adjust the claw.

      Standard
      Area Specified Condition
      a 3.0 mm (0.118 in.)
      Text in Illustration
      *1 Front Marker Light Assembly
      *2 Claw

  2. INSTALL FRONT FENDER LINER

    Click here