HIGH INTENSITY DISCHARGE HEADLIGHT BULB REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE HEADLIGHT COVER


    1. A004I8H

      Turn the headlight cover in the direction indicated by the arrow shown in the illustration, and remove it.

  4. REMOVE DISCHARGE HEADLIGHT BULB


    1. A004HEC

      Turn the headlight light control ECU sub-assembly socket in the direction indicated by the arrow in the illustration and disconnect the headlight light control ECU sub-assembly socket.

    2. A004KA4E02

      Release the set spring as indicated by the arrow in the order shown in the illustration.

    3. Remove the discharge headlight bulb.

      Note

      Do not touch the glass part of the bulb.