HEADLIGHT ASSEMBLY(for LED Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RH and LH sides.

  • The procedure listed below is for LH side.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT BUMPER COVER

    Click here

  3. REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. A004JKS

      Disengage the 2 clamps to disconnect the wire harness.

    2. A004J1ZE01

      Remove the bolt A.

    3. Remove the 3 bolts B and the front bumper side support LH.

  4. REMOVE HEADLIGHT ASSEMBLY


    1. Disconnect each connector.

    2. A004HM0

      Remove the clip.

    3. Remove the bolt.

    4. Disengage the claw to remove the headlight assembly.