SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. SEPARATE FRONT FENDER LINER LH


    1. Steer the front tire right most.

    2. A004IBO

      Remove the 4 clips and partially remove the front fender liner.

  2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A004IH7E02
      Text in Illustration
      *1 Protective Tape
      *2 Service Hole

      Using a screwdriver wrapped with protective tape, disengage the claw from service hole.

      Tech Tips

      Insert screwdriver on the level.

    2. Disconnect the connector to remove the side turn signal light assembly.