FRONT TURN SIGNAL LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT FRONT TURN SIGNAL LIGHT SOCKET (w/ Side Marker Light)

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Front Turn Signal Light Socket)

      Measure the voltage according to the value(s) in the table below.

      Standard
      Condition Specified Condition Battery positive (+) → 2 Battery negative (-) → 4 Clearance light comes on Battery positive (+) → 1 Battery negative (-) → 4 Turn signal light comes on

      If the result is not as specified, replace the bulb or the front turn signal light socket.

2. INSPECT FRONT TURN SIGNAL LIGHT SOCKET (w/o Side Marker Light)

   
   

   1. for Halogen Headlight

      
      
      1. 

         Text in Illustration

         *a	Component without harness connected (Front Turn Signal Light Socket)

         Measure the voltage according to the value(s) in the table below.

         Standard
         Condition Specified Condition Battery positive (+) → 1 Battery negative (-) → 4 Turn signal light comes on Battery positive (+) → 3 Battery negative (-) → 4 Fog light comes on

   2. for HID Headlight

      
      

      1. Measure the voltage according to the value(s) in the table below.

         Standard
         Condition Specified Condition Battery positive (+) → 1 Battery negative (-) → 4 Fog light comes on Battery positive (+) → 3 Battery negative (-) → 4 Turn signal light comes on

   3. w/ Daytime Running Light

      
      

      1. Measure the voltage according to the value(s) in the table below.

         Standard
         Condition Specified Condition Battery positive (+) → 2 Battery negative (-) → 4 Daytime Running light comes on

         If the result is not as specified, replace the bulb or the front turn signal light socket.