WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT FENDER LINER LH

    A004HTQ

    1. Remove the bolt.

    2. Remove the grommet.

      Tech Tips

      The grommet need to be replaced with new ones because they will break when they are removed.

    3. A004IS4

      Using a clip remover, disengage the 18 clips and remove the front fender liner LH.

  3. DRAIN WINDSHIELD WASHER FLUID


    1. A004KTT

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the windshield washer fluid.

      Tech Tips

      Use a container to collect the windshield washer fluid.

  4. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A004JZC

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly.