RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT MIR HTR RELAY

    A004JTXE14
    Text in Illustration
    *a

    Component without harness connected

    (MIR HTR Relay)

    1. Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
        Battery voltage applied to terminals 1 and 2 Below 1 Ω

        • If the result is not as specified, replace the MIR HTR relay.