PROCEDURE
CUSTOMIZE LIGHTING SYSTEM (EXT)
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Response Time*1 | Normal | Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. | Normal or Long | Main Body ECU (Network Gateway ECU) |
| Light Auto OFF Delay*1 | 30 s | Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all doors with the low beam headlights on. | OFF, 30 s, 60 s or 90 s | |
| Follow Me Home Lighting Time*2 | 30 s | Changes the low beam headlight lighting time when ignition switch is off and dimmer switch is pulled to flash headlights once. | 30 s, 60 s, 90s, or 120s |
Tech Tips
Items for which there are no settings do not appear on the GTS, or do not operate.
*1: w/ Automatic Light Control System
*2: w/ Follow Me Home System