LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. A004H7HE01
      Text in Illustration
      *a

      Component without harness connected

      (Back Door Opener Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Back door opener switch not pushed 10 kΩ or higher
      1 - 2 Back door opener switch pushed Below 1 Ω

      If the result is not specified, replace the back door opener switch assembly.