POWER WINDOW REGULATOR MOTOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

Use the same procedure for the RH side and LH side.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Click here

  2. REMOVE DOOR ARMREST COVER

    Click here

  3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  4. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  6. REMOVE FRONT DOOR SERVICE HOLE COVER

    Click here

  7. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  8. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY

    Click here

  9. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY

    Click here

  10. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY


    1. A004I6F

      Using a T25 "TORX" socket wrench, remove the 3 screws and the power window regulator motor assembly.