SOLAR SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Click here

  3. SEPARATE NO. 1 DEFROSTER NOZZLE GARNISH


    1. A004ICTE03
      Text in Illustration
      *1 Moulding Remover

      Using a moulding remover, separate the 3 claws as shown in the illustration.

  4. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    1. A004HCW

      Disconnect the connector.

    2. Disengage the 2 claws and remove the automatic light control sensor.