BLOWER RESISTOR INSPECTION

PROCEDURE


  1. INSPECT BLOWER RESISTOR


    1. A004KS5E12
      Text in Illustration
      *a

      Component without harness connected

      (Blower Resistor)

      Disconnect the connector from the blower resistor.

      Tech Tips

      There is a fuse between terminals 1 and 3.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 4 Always 2.92 Ω
      1 - 3 Always 0.44 Ω
      1 - 2 Always 1.12 Ω

      If the resistance is not as specified, replace the blower resistor.