FRONT SEAT CUSHION HEATER INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (FRONT SEAT CUSHION HEATER ASSEMBLY) LH


    1. A004JRJE02
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seat Cushion Pad LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - H18-3 Always Below 1 Ω
      A-2 - H18-2 Always 6.01 to 7.33 Ω
      H18-1 - H18-2 Always 6.01 to 7.33 Ω

      If the result is not as specified, replace the separate type front seat cushion pad LH.

  2. INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (FRONT SEAT CUSHION HEATER ASSEMBLY) RH


    1. A004ICWE02
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seat Cushion Pad RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 - G4-3 Always Below 1 Ω
      A-2 - G4-2 Always 6.01 to 7.33 Ω
      G4-1 - G4-2 Always 6.01 to 7.33 Ω

      If the result is not as specified, replace the separate type front seat cushion pad RH.