FRONT SEATBACK HEATER INSPECTION

PROCEDURE


  1. INSPECT SEPARATE TYPE FRONT SEATBACK PAD (FRONT SEATBACK HEATER ASSEMBLY) LH


    1. A004KFRE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seatback Pad LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 5.29 to 6.45 Ω

      If the result is not as specified, replace the separate type front seatback pad LH.

  2. INSPECT SEPARATE TYPE FRONT SEATBACK PAD (FRONT SEATBACK HEATER ASSEMBLY) RH


    1. A004KFRE01
      Text in Illustration
      *a

      Component without harness connected

      (Separate Type Front Seatback Pad RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 5.29 to 6.45 Ω

      If the result is not as specified, replace the separate type front seatback pad RH.