FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

   CAUTION:

   
   

   • The nuts must not be reused.

   • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

   
   

   1. Install the front seat airbag assembly with 2 new nuts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Engage the 2 clamps.

2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

   Click here

3. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

   Click here

4. INSTALL FRONT SEAT INNER CUSHION SHIELD

   Click here

5. INSTALL FRONT SEAT CUSHION SHIELD

   Click here

6. INSTALL SEAT ADJUSTER COVER CAP

   Click here

7. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side)

   Click here

8. INSTALL RECLINING ADJUSTER RELEASE HANDLE

   Click here

9. INSTALL FRONT SEAT ASSEMBLY

   Click here

10. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here