COMBINATION METER REASSEMBLY

PROCEDURE


  1. INSTALL COMBINATION METER COVER


    1. A004HJS

      Engage the 6 claws to install the combination meter cover.

      Note

      A004KP6

      Make sure that the meter dial plate is securely installed to the locating tabs when the combination meter cover is installed.

  2. INSTALL COMBINATION METER GLASS


    1. A004KWX

      Engage the 7 claws to install the combination meter glass.

      Note

      Do not allow any dirt (fingerprints, grease, etc.) to adhere to the combination meter glass or meter display panel. If they are dirty, wipe them clean with a soft cloth.