COMBINATION METER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)

    Click here

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)

    Click here

  3. REMOVE METER HOOD SUB-ASSEMBLY

    Click here

  4. REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT

    Click here

  5. REMOVE COMBINATION METER ASSEMBLY


    1. A004K54

      Remove the 2 screws.

    2. Disengage the 2 clips.

    3. A004KYS

      Disconnect the connector and remove the combination meter assembly.