METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE METER / GAUGE SYSTEM

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Combination Meter / Warning.

      5. Select the setting by referring to the table below.

         Note

         
         

         • Be sure to record the current value before customizing.

         Warning

         Tester Display	Default	Content	Setting	Relevant ECU
         Key Remind Sound	NORMAL	Function to change the frequency of the key reminder buzzer.	NORMAL, FAST or SLOW	Combination meter assembly
         Tail Remind Buzzer	ON	Function to change the Tail Remind Buzzer.	ON or OFF	Combination meter assembly
         Driver Side Seatbelt Warning Buzzer*	ON	Function to turn on/off the seat belt warning buzzer	ON or OFF	Combination meter assembly
         Front Passenger Side Seatbelt Warning Buzzer*	ON	Function to change the seat-belt warning buzzer.	ON or OFF	Combination meter assembly

         
         

         • *: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more

      6. Connect the GTS to the DLC3.

      7. Turn the ignition switch to ON.

      8. Turn the GTS on.

      9. Enter the following menus: Customize Setting / Combination Meter / Air Conditioner.

      10. Select the setting by referring to the table below.

          Note

          
          

          • Be sure to record the current value before customizing.

          Air Conditioner

          Tester Display	Default	Content	Setting	Relevant ECU
          Ambient Temperature Adjustment	0C (0F)	Function to change the display temperature to match the actual temperature.	+3C (+5.4F) +2C (+3.6F), +1C (+1.8F), 0C (0F), -1C (-1.8F), -2C (-3.6F) or 3C (-5.4F)	Combination meter assembly