METER / GAUGE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • Use these procedures to troubleshoot the combination meter.

  • *: Use the GTS.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT
  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.

    Result
    Proceed to
    NEXT

    NEXT
  3. CHECK CAN COMMUNICATION SYSTEM*


    1. Use a GTS to check if the CAN communication system is functioning normally.

      Result
      Result Proceed to
      CAN DTC is not output A
      CAN DTC is output B

    B
    A
  4. PROBLEM SYMPTOMS TABLE

    Result
    Result Proceed to
    Fault is not listed in Problem Symptoms Table A
    Fault is listed in Problem Symptoms Table B

    B
    A
  5. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Data List/Active Test.

      Click here

    2. Terminals of ECU.

      Click here

    3. On-vehicle Inspection.

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  6. ADJUST, REPAIR OR REPLACE

    Result
    Proceed to
    NEXT

    NEXT
  7. CONFIRMATION TEST*

    Result
    Proceed to
    NEXT

    NEXT