TRIP SWITCH INSPECTION

PROCEDURE


  1. INSPECT TRIP SWITCH

    A004HUQE02
    Text in Illustration
    *a

    Component without harness connected

    (Trip Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (TRIP) - 1 Trip switch off 10 kΩ or higher
      Trip switch on Below 1 Ω
      3 (DISP) - 1 Display switch off 10 kΩ or higher
      Display switch on Below 1 Ω
      8 (CS) - 1 Unit switch off 10 kΩ or higher
      Unit switch on Below 1 Ω