ENGINE IMMOBILISER SYSTEM(w/o Entry and Start System), Diagnostic DTC:B1408

DTC Code DTC Name
B1408 Meter EEPROM Circuit

DESCRIPTION

The main body ECU (network gateway ECU) stores this code when an internal malfunction is detected in the combination meter assembly.

DTC Code DTC Detection Condition Trouble Area
B1408 Internal malfunction in the combination meter assembly. Combination meter assembly

CAUTION / NOTICE / HINT

Note

If the combination meter assembly is replaced, refer to Service Bulletin.

PROCEDURE


  1. REGISTER RECOGNITION CODES


    1. Register the recognition codes (Refer to Service Bulletin).


    NEXT

  2. CHECK FOR DTC


    1. Check for DTCs Click here.

      OK
      DTC B1408 is not output.

    OK

    END

    NG

    REPLACE COMBINATION METER ASSEMBLY Click here