IGNITION KEY CYLINDER LIGHT INSTALLATION

PROCEDURE

1. INSTALL TRANSPONDER KEY AMPLIFIER

   
   

   1. Connect the connector.

   2. Engage the 2 claws to install the transponder key amplifier.

2. INSTALL UPPER STEERING COLUMN COVER

   Click here

3. INSTALL LOWER STEERING COLUMN COVER

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)

   Click here

6. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT

   Click here

7. INSTALL METER HOOD SUB-ASSEMBLY

8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

9. INSTALL INSTRUMENT SIDE PANEL LH

   Click here