UNLOCK WARNING SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicle.

PROCEDURE


  1. INSTALL UN-LOCK WARNING SWITCH ASSEMBLY


    1. Attach the 2 claws to install the un-lock warning switch assembly.

    2. Connect the un-lock warning switch assembly connector.

  2. INSTALL UPPER STEERING COLUMN COVER

    Click here

  3. INSTALL LOWER STEERING COLUMN COVER

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

    Click here

  5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)

    Click here

  6. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT

    Click here

  7. INSTALL METER HOOD SUB-ASSEMBLY

    Click here

  8. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)

    Click here

  9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)

    Click here

  10. INSTALL INSTRUMENT SIDE PANEL LH

    Click here