TRANSMITTER BATTERY(w/o Entry and Start System) REPLACEMENT

CAUTION / NOTICE / HINT

Note

Take extra care when handling these precision electronic components.

PROCEDURE


  1. REMOVE TRANSMITTER HOUSING COVER

    Click here

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

    Click here

  3. REMOVE TRANSMITTER BATTERY


    1. A004ILI

      Disengage the hook and remove the transmitter battery cover.

    2. A004K76

      Remove the transmitter battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not use excessive force when prying up the battery (lithium battery: CR2016) as this may damage the terminals.

      • Do not touch the battery with wet hands. Water may cause it to rust.

      • Do not touch or move any components inside the transmitter as this may interfere with its proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.

  4. INSTALL TRANSMITTER BATTERY


    1. A004HUV

      Install a battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.

      Note


      • Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter from being damaged.

    2. A004ING

      Engage the hook and install the transmitter battery cover.

      Note

      Securely engage the claws of the cover to prevent the poor contact between the battery and terminal.

  5. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

    Click here

  6. INSTALL TRANSMITTER HOUSING COVER

    Click here