CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (NETWORK GATEWAY ECU)
| *1 | Instrument Panel Junction Block Assembly | *2 | Main Body ECU (Network Gateway ECU) |
Remove the main body ECU (network gateway ECU) from the instrument panel junction block assembly.
Disconnect the D5, D6 and A73 main body ECU (network gateway ECU) connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| MB-1 (BECU) - Body ground | None - Body ground | Battery power supply | Always | 11 to 14 V |
| MB-8 (IG) - Body ground | None - Body ground | Ignition switch power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| MB-9 (ACC) - Body ground | None - Body ground | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| MB-11 (GND) - Body ground | None - Body ground | Ground | Always | Below 1 Ω |
| MB-32 (BMPX) - Body ground | None - Body ground | Battery power supply | Always | 11 to 14 V |
| D5-22 (KSW) - Body ground | BR - Body ground | Unlock warning switch input | No Key in ignition key cylinder (off) | Below 1 V |
| Key inserted ignition key cylinder (on) | 11 to 14 V | |||
| D6-1 (GND) - Body ground | B - Body ground | Ground | Always | Below 1 Ω |
| A73-4 (GND) - Body ground | B-Y - Body ground | Ground | Always | Below 1 Ω |
Reconnect the D5, D6 and A73 main body ECU (network gateway ECU) connectors.
Install the main body ECU (network gateway ECU) to the instrument panel junction block assembly.
Measure the voltage, check for pulse according to the valve(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| 3A-28 - Body ground | V - Body ground | Driver side door courtesy light switch input | Driver side door open | Below 1 V |
| Driver side door closed | 11 to 14 V |