WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Note

    In the table below, the values listed under Normal Condition are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry & Start / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Wireless Control Wireless door lock control function / OFF or ON Customized setting displayed -
      Wireless Buzzer Resp Wireless buzzer response / OFF or ON Customized setting displayed -
      Hazard Answer Back Hazard answer-back of wireless / OFF or ON Customized setting displayed -
      Open Door Warning Open door warning / OFF or ON Customized setting displayed -
      Unlock 2 Operation 2 times operation of wireless unlock / OFF or ON Customized setting displayed -
      Panic Function*1 Panic function / OFF or ON Customized setting displayed -
      Wireless Auto Lock Automatic lock function / OFF or ON Customized setting displayed -
      Auto Lock Time Automatic lock time / 30 s, 60 s or 120 s Customized setting displayed -
      Trunk Lid Operation Opening the luggage compartment door by the door control transmitter module set sub-assembly/ 1 tim ON, 2 tim ON, Long1 or Long2 Customized setting displayed -
      Wireless Buzzer Vol Wireless door lock buzzer volume/Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 Customized setting displayed -
      Detection of Vehicle*2 Detection of vehicle function OFF or ON Customized setting displayed -
      D Door Courtesy SW Driver side door courtesy light switch signal/ON or OFF

      ON: Driver side door opened

      OFF: Driver side door closed

      		 -
      D-Door Lock Pos SW Driver side door unlock detection switch signal/LOCK or UNLOCK

      LOCK: Driver side door locked

      UNLOCK: Driver side door unlocked

      		 -
      P Door Courtesy SW Passenger side door courtesy light switch signal/ON or OFF

      ON: Passenger side door opened

      OFF: Passenger side door closed

      		 -
      P-Door Lock Pos SW Passenger side door unlock detection switch signal/LOCK or UNLOCK

      LOCK: Passenger side door locked

      UNLOCK: Passenger side door unlocked

      		 -
      Luggage Door Courtesy Luggage compartment door courtesy switch signal / OFF or ON

      OFF: Luggage compartment door closed

      ON: Luggage compartment door opened

      		 -
      IG SW Engine switch IG signal/ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 -
      ACC SW Engine switch ACC signal/ON or OFF

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 -
      Hazard Output Hazard warning light output / OFF or ON

      OFF: Not during hazard answerback operation

      ON: During hazard answer-back operation

      		 -
      Wireless Buzzer Output Wireless door lock buzzer output / OFF or ON

      OFF: Not during wireless door lock buzzer sounding

      ON: During wireless door lock buzzer sounding

      		 -

      • *1: w/ Panic Alarm Control Function

      • *2: w/ Vehicle Position Sensing Function

      Entry and Start
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      C Code Difference Status of the Different Rolling Code / No or Yes

      No: Key rolling code matched to vehicle

      Yes: Key rolling code not matched to vehicle

      		 -
      ID Code Difference Status of the ID Code Difference / No or Yes

      No: Key ID code matched to vehicle

      Yes: Key ID code not matched to vehicle

      		 -

  2. PERFORM ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Active Test.

    5. According to the display on the GTS, perform the Active Test.

    Main Body
    Tester Display Test Part Control Range Diagnostic Note
    Door Lock Door lock motor Unlock / Lock -
    D-Door Unlock Driver side door lock motor OFF / ON -
    Trunk Door Open Luggage door lock motor OFF / ON -
    Wireless Buzzer Wireless door lock buzzer OFF / ON -
    Hazard Turn signal flasher assembly OFF / ON -
    Door Open/Close State Main body ECU (network gateway ECU) OFF / ON -