DATA LIST
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Open Door Warning | Open door warning / OFF or ON | Customized setting displayed | - |
| D Door Courtesy SW | Driver side door courtesy light switch signal / ON or OFF | ON: Driver side door opened OFF: Driver side door closed |
- |
| Door Lock SW-Lock | Door control switch (power window regulator master switch assembly or power window regulator switch assembly*1) lock signal / OFF or ON | OFF: Lock side of door control switch (power window regulator master switch assembly or power window regulator switch assembly*1) not pushed ON: Lock side of door control switch (power window regulator master switch assembly or power window regulator switch assembly*1) pushed |
- |
| Door Lock SW-Unlock | Door control switch (power window regulator master switch assembly or power window regulator switch assembly*1) unlock signal / OFF or ON | OFF: Unlock side of door control switch (power window regulator master switch assembly or power window regulator switch assembly*1) not pushed ON: Unlock side of door control switch (power window regulator master switch assembly or power window regulator switch assembly*1) pushed |
- |
| Door Key SW-Lock*2 | Driver door key-linked lock/unlock switch lock signal / OFF or ON | OFF: Driver door key cylinder not turned to lock position ON: Driver door key cylinder turned to lock position |
- |
| Door Key SW-Unlock*2 | Driver door key-linked lock/unlock switch unlock signal / OFF or ON | OFF: Driver door key cylinder not turned to unlock position ON: Driver door key cylinder turned to unlock position |
- |
| P Door Courtesy SW | Passenger side door courtesy light switch signal / ON or OFF | ON: Passenger side door opened OFF: Passenger side door closed |
- |
| Luggage Courtesy SW | Luggage compartment door courtesy switch signal / OFF or ON | OFF: Luggage compartment door closed ON: Luggage compartment door opened |
- |
| Back Door Open | Luggage compartment door lock / Prohibit or Permit | Prohibit: Luggage compartment door locked Permit: Luggage compartment door unlocked |
- |
| Trunk Lock/Unlock SW | Status of the luggage compartment door lock/unlock switch /OFF or ON | OFF: Luggage compartment door key cylinder not turned to unlock position ON: Luggage compartment door key cylinder turned to unlock position |
- |
| Back Door Open Handle SW | Back door opener switch / OFF or ON | OFF: Back door opener switch not pushed ON: Back door opener switch pushed |
- |
| IG SW | Ignition switch status / OFF or ON | OFF: Ignition switch off ON: Ignition switch to ON |
- |
| ACC SW | Ignition switch status / OFF or ON | OFF: Ignition switch off ON: Ignition switch on (ACC) |
- |
| Key Unlock Warning SW | Unlock warning switch signal / OFF or ON | OFF: No key is in ignition key cylinder ON: Key is in ignition key cylinder |
- |
| Front Passenger Unlock*3 | Status of passenger side door unlock / OFF or ON | OFF: Passenger side door locked ON: Passenger side door unlocked |
- |
| Door Lock Output | Status of all doors lock signal output / OFF or ON | All doors lock operation is not performed All doors lock operation is performed |
- |
| All Unlock | Status of all doors unlock signal output / OFF or ON | OFF: All doors unlock operation is not performed ON: All doors unlock operation is performed |
- |
| Driver Unlock*3 | Status of driver side door unlock / OFF or ON | OFF: Driver side door locked ON: Driver side door unlocked |
- |
| Rear Gate/Trunk Output | Luggage compartment door unlock signal output / OFF or ON | OFF: Luggage compartment door open operation is not performed ON: Luggage compartment door open operation is performed |
- |
| Double Lock Output*3 | Status of double lock output / OFF or ON | OFF: Double locking system unset ON: Double locking system set |
- |
*1: w/ Passenger Side Door Control Switch
*2: w/ Key-linked Switch
*3: w/ Double Locking System
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Door Lock | Door lock motor | Unlock / Lock | - |
| D-Door Unlock | Driver door lock motor | OFF / ON | - |
| Trunk and Back-Door Open | Back door lock motor | OFF / ON | - |
| Double Lock Set* | Door lock motor | OFF / ON | - |
| Double Lock Unset* | Door lock motor | OFF / ON | - |
| Door Open/Close State | Main body ECU (network gateway ECU) | OFF / ON | - |
*: w/ Double Locking System