POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK

CHECK POWER DOOR LOCK OPERATION

1. Check the basic functions.

   
   

   1. Check that all doors lock when the lock side of the door control switch is pressed.

   2. Check that all doors unlock when the unlock side of the door control switch is pressed.

   3. Check that all doors lock when the driver door key cylinder is turned to lock using the mechanical key.

   4. Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.

2. Check the key lock-in prevention function (w/ Entry and Start System).

   Note

   In order to prevent the electrical key from being actually locked-in, the following inspection should be performed with the driver side door window open.

   
   

   1. Place the electrical key in the cabin.

   2. With the driver side door open, turn the door control switch to LOCK, and then close the driver side door. Then check that all doors unlock.

3. Check the key lock-in prevention function (w/o Entry and Start System).

   Note

   In order to prevent the key from being actually locked-in, the following inspection should be performed with the driver side door window open.

   
   

   1. Turn the ignition switch to ON or ACC.

   2. With the driver door open, check that all doors unlock immediately after the door lock knob for the driver door is pressed.*

   3. With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.

   4. With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.

      
      

      • *: w/ Double Locking System

4. Check the security function of the door lock control system.

   
   

   1. Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)

   2. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

   3. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry lock operation*1. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

      
      

      • *1: w/ Entry and Start System

      Tech Tips

      Check that the security function of the door lock control system is canceled under the following conditions:

      
      

      • Turn the ignition switch to ON.

      • The driver door is unlocked using the key.

      • The unlock side of the door control switch (for manual operation) is pressed after the door lock knob is unlocked manually.

      • The doors are unlocked by a wireless operation.

      • The doors are unlocked by entry operation.