INSTRUMENT PANEL SPEAKER INSPECTION

PROCEDURE


  1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY


    1. Check that there is no foreign matter in the front No. 2 speaker assembly, no tears on the front No. 4 speaker assembly cone or other abnormalities.

    2. A004HQ4E02
      Text in Illustration
      *a

      Component without harness connected

      (Front No. 2 speaker assembly)

      Measure the resistance of the front No. 2 speaker assembly.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (+) - 2 (+) Always 3.4 to 4.6 Ω
      3 (-) - 4 (-) Always 3.4 to 4.6 Ω

      If the result is not as specified, replace the front No. 2 speaker assembly.