LIN COMMUNICATION SYSTEM SYSTEM DESCRIPTION


  1. LIN COMMUNICATION SYSTEM DESCRIPTION

    The LIN communication system is used for the communication between the components in the tables below. If the communication cannot be performed through the LIN communication because of an open in the communication lines or other reasons, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.

    Tech Tips


    • Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

    • In the following table, "○" indicates that the function applies, and "-" indicates that it does not.

    Door Bus Lines
    Component Master Control LIN Communication DTC Output Function
    Main Body ECU (Network Gateway ECU) ○ ○
    Power Window Regulator Master Switch Assembly - -
    Certification Bus Lines (w/ Entry and Start System)
    Component Master Control LIN Communication DTC Output Function
    Certification ECU (Smart Key ECU Assembly) ○ ○
    Steering Lock Actuator Assembly - -
    ID Code Box (Immobiliser Code ECU)* - -

    • * : w/ ID Code Box