RADIO RECEIVER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. A004KUM

      Remove the 4 bolts and pull the radio receiver assembly with bracket toward the rear of the vehicle.

    2. Disconnect each connector and remove the radio receiver assembly with bracket.

  4. REMOVE NO. 1 RADIO BRACKET


    1. A004H1L

      Remove the 4 screws and remove the No. 1 radio bracket from the radio receiver assembly.

  5. REMOVE NO. 2 RADIO BRACKET

    Tech Tips

    Use the same procedure as for the No. 1 radio bracket.