STEERING PAD SWITCH INSTALLATION

PROCEDURE

1. INSTALL STEERING PAD SWITCH ASSEMBLY

   
   

   1. Engage the 4 claws to install the steering pad switch assembly.

   2. Install the 2 screws.

   3. Pass the wire harness over the 2 guides.

   4. Connect the steering pad switch connector to the spiral cable sub-assembly.

2. INSTALL HORN BUTTON ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Torque:

   6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

4. INSPECT SRS WARNING LIGHT

   Click here