STEERING PAD SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing (See page).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least for 60 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    The power window system utilizes a mechanism that the door glass moves down slightly when the door is opened, and that the glass moves up when closing the door in order to prevent the door molding from being damaged. When the battery negative (-) terminal needs to be disconnected for servicing, fully open the driver and passenger door glasses in advance.

  3. REMOVE HORN BUTTON ASSEMBLY

    Click here

  4. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.

    2. A004JM1

      Remove the 2 guides.

    3. A004HE2

      Remove the 2 screws.

    4. Disengage the 4 claws to remove the steering pad switch assembly.