POWER STEERING SYSTEM, Diagnostic DTC:C1541

DTC Code DTC Name
C1541 Vehicle Speed Signal Malfunction

DESCRIPTION

The power steering ECU assembly receives vehicle speed signals from the skid control ECU via CAN communication. The power steering ECU assembly provides appropriate assisting force in accordance with the vehicle speed, based on the signals.

If the power steering ECU assembly stores this DTC, it adjusts the amount of power assist to the amount provided for a speed of 100 km/h (62 mph) and continues the system control.

DTC Code DTC Detection Condition Trouble Area
C1541 The vehicle speed signals malfunction

  • Speed sensor circuit

  • Skid control ECU

  • CAN communication system

  • Power steering ECU assembly

CAUTION / NOTICE / HINT

Note

If the power steering ECU assembly is replaced with a new one, perform rotation angle sensor initialization and torque sensor zero point calibration Click here.

PROCEDURE


  1. CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)


    1. Check if DTC U0416 is output Click here.

      Result
      Result Proceed to
      DTC U0416 is not output. A
      DTC U0416 is output. B

      Tech Tips

      DTC U0416 indicates a skid control ECU communication malfunction in the power steering system.


    B

    GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    A

  2. CHECK OTHER DTC OUTPUT (BRAKE CONTROL SYSTEM)


    1. Using the GTS, check for DTCs and confirm that there are no problems in the brake control system Click here.

      Result
      Result Proceed to
      DTC is not output. A
      DTC is output. B

    A

    REPLACE POWER STEERING ECU ASSEMBLY Click here

    B

    GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here