PARKING BRAKE ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH


    1. A004HIW

      Remove the 2 bolts and separate the rear disc brake caliper assembly LH.

      Note

      Hang the rear disc brake cylinder assembly LH with wire or equivalent.

  3. REMOVE REAR DISC


    1. A004IBTE03
      Text in Illustration
      *a Matchmark

      Put matchmarks on the rear disc and the rear axle hub.

    2. Release the parking brake and remove the rear disc.

      Tech Tips

      If the disc cannot be removed easily, use a screwdriver to turn the shoe adjuster as shown in the illustration in order to contract the parking brake shoes.

      A004JYLE02
      Text in illustration
      *a Expand *b Contract

  4. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Front Side)


    1. A004JFUE02

      Using SST, remove the parking brake shoe return tension spring.

      SST
      09921-00011

  5. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Rear Side)


    1. A004HB9E02

      Using SST, remove the parking brake shoe return tension spring.

      SST
      09921-00011

  6. REMOVE PARKING BRAKE SHOE STRUT COMPRESSION SPRING


    1. A004ISKE02

      Using SST, remove the parking brake shoe strut compression spring.

      SST
      09921-00011

  7. FIX PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Front Side)


    1. A004H6QE02

      Using SST, remove the brake shoe hold down compression spring.

      SST
      09718-00011

      Tech Tips

      Hold the parking brake shoe hold down spring pin with your finger.

  8. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN (for Front Side)


    1. Remove the parking brake shoe hold down spring pin (for front side).

  9. REMOVE PARKING BRAKE SHOE STRUT LH


    1. Pull the parking brake shoe towards the front of the vehicle by hand as shown in the illustration.

    2. A004IOBE02
      Text in Illustration
      *1 Parking brake shoe strut LH

      Remove the parking brake shoe strut LH.

  10. REMOVE PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Rear Side)

    A004HOKE01

    1. Using SST, remove the brake shoe hold down compression spring (for rear side).

      SST
      09718-00011

      Tech Tips

      Use the service hole to hold the parking brake shoe hold down spring pin with your finger.

  11. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN (for Rear Side)


    1. Remove the parking brake shoe hold down spring pin (for rear side).

  12. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. A004KL1

      Expand the parking brake shoe outward by hand and pull downward to separate them from the parking brake plate.

    2. A004HGB

      Remove the parking brake shoe adjusting screw set.

  13. REMOVE PARKING BRAKE SHOE KIT


    1. A004IV5

      Remove the parking brake shoe kit.

  14. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING


    1. A004J0J

      Remove the parking brake shoe return tension spring.

  15. REMOVE PARKING BRAKE SHOE LEVER LH


    1. A004KNQ

      Using needle-nose pliers, remove the parking brake shoe lever LH from the No. 3 parking brake cable assembly as shown in the illustration.

  16. REMOVE PARKING BRAKE SHOE TYPE C WASHER


    1. A004HU2

      Widen and remove the parking brake shoe type C washer from the parking brake shoe as shown in the illustration.

  17. REMOVE PARKING BRAKE SHOE WAVE WASHER


    1. Remove the parking brake shoe wave washer.

  18. REMOVE PARKING BRAKE SHOE PIN


    1. Remove the parking brake shoe pin.