PARKING BRAKE CABLE REMOVAL

PROCEDURE


  1. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

    Click here

  3. REMOVE PARKING BRAKE ASSEMBLY

    Click here

  4. REMOVE CLAMP H/B


    1. A004K3Q

      Remove the 2 nuts and the clamp H/B.

  5. REMOVE LOWER CASING BRACKET


    1. A004JMS

      Remove the 2 bolts and the lower casing bracket.

  6. REMOVE NO. 3 FUEL TANK PROTECTOR (for Metal Type)

    Click here

  7. REMOVE NO. 1 FUEL TANK PROTECTOR (for Clamp Type)

    Click here

  8. REMOVE NO. 2 FUEL TANK PROTECTOR (for Clamp Type)

    Click here

  9. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. A004I53

      Remove the 2 nuts and the 2 bolts and the 2 compression spring and disconnect the center exhaust pipe assembly.

    2. A004INU

      Remove the 2 nuts and the 2 bolts and disconnect the tail exhaust pipe assembly.

    3. A004K27

      Remove the cushion rubber and the center exhaust pipe assembly.

    4. Remove the gasket.

  10. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

    Click here

  11. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Remove the 4 bolts and separate the No. 3 parking brake cable assembly from the vehicle.

      A004H89
      Text in illustration
      A004I9S Bolt A004KUZ Vehicle Front Side
    2. A004I0W

      Remove the clamp and remove the No. 3 parking brake cable assembly.

  12. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY

    Tech Tips

    Use the same No. 3 parking brake cable assembly as for the No. 2 parking brake cable assembly.