REAR BRAKE(for Opposed Type Caliper) REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE


  1. TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG


    1. Temporarily install the 2 rear disc brake bleeder plugs to the rear disc brake cylinder assembly LH.

  2. INSTALL REAR DISC BRAKE BLEEDER PLUG CAP


    1. Install the 2 rear disc brake bleeder plug caps to the rear disc brake bleeder plugs.

  3. INSTALL PISTON SEAL


    1. A004JSQ

      Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new piston seals and install them into the groove of the rear disc brake cylinder assembly LH.

      Text in Illustration
      A004HD0 Lithium Soap Base Glycol Grease

  4. INSTALL REAR DISC BRAKE PISTON


    1. A004J7TE04
      Text in Illustration
      *1 Piston
      *2 Cylinder Boot
      A004HD0 Lithium soap base glycol grease

      Apply a light layer of lithium soap base glycol grease to a new cylinder boot, and put it on the disc brake piston as shown in the illustration.

    2. Fit the seal section of the cylinder boot into the groove of the rear disc brake cylinder assembly LH.

      Note

      Securely fit the seal section of the cylinder boot.

    3. Push in the piston by hand and fit the seal section of the boot into the groove of the rear disc brake piston.

      Note

      Securely fit the seal section of the cylinder boot.