BRAKE PEDAL(except LHD M/T) REMOVAL

PROCEDURE


  1. REMOVE INSTRUMENT SIDE PANEL LH (w/o Knee Airbag)

    Tech Tips

    Use the same procedure for the LH side as for the RH side Click here.

  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

    Click here

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

    Click here

  4. REMOVE TCM (for Automatic Transmission)

    Click here

  5. REMOVE STOP LIGHT SWITCH ASSEMBLY

    Click here

  6. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. A004K0Q

      Disengage the 2 clamps and remove the stop light switch mounting adjuster from the brake pedal support sub-assembly.

  7. REMOVE PUSH ROD PIN


    1. A004KV5

      Remove the clip and the push rod pin from the push rod clevis.

  8. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A004JFW

      Remove the 2 bolts from the brake pedal support assembly.

    2. A004K1Z

      Remove the 4 nuts and the brake pedal support assembly.