FRONT SPEED SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • The procedures listed below are for the LH side.

  • Use the same procedures for the RH and LH sides.

PROCEDURE


  1. INSTALL FRONT SPEED SENSOR LH


    1. Install the front speed sensor LH with the bolt.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Do not allow any foreign matter such as dirt or dust to enter between the steering knuckle and the front disc brake dust cover.

    2. Connect the 6 front speed sensor clamps.

      Note

      Securely connect the connector.

  2. INSTALL FRONT FENDER LINER LH

    Click here

  3. INSTALL FRONT WHEEL LH

    Torque:
    120 N*m  { 1224 kgf*cm, 89 ft.*lbf }

  4. INSPECT SPEED SENSOR SIGNAL

    Click here