FRONT SPEED SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • The procedures listed below are for the LH side.

  • Use the same procedures for the RH and LH sides.

PROCEDURE


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT FENDER LINER LH

    Click here

  3. REMOVE FRONT SPEED SENSOR LH


    1. A004IPI

      Disconnect the front speed sensor connector.

    2. Disconnect the 6 clamps.

      A004H17
    3. A004HSX

      Remove the bolt and front speed sensor LH from the steering knuckle.

      Note

      Clean the speed sensor installation hole and the contact surfaces every time the front speed sensor is removed.