FRONT BRAKE FLEXIBLE HOSE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RH and LH sides.

  • The procedure listed below is for LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. DRAIN BRAKE FLUID

    Note

    Immediately wash off any brake fluid that comes into contact with any painted surfaces.

  3. REMOVE NO. 1 FRONT FLEXIBLE HOSE


    1. A004JHL

      Remove the bolt and separate the No. 1 front flexible hose from the front shock absorber assembly.

    2. A004JG2

      Remove the union bolt, 2 gaskets and No. 1 front flexible hose.

    3. A004KI7

      Hold the No. 1 flexible hose with a wrench and disconnect the brake tube using a union nut wrench.

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting position.

    4. Remove the clip.

    5. Remove the No. 1 front flexible hose.