FRONT BRAKE(for Opposed Type Caliper) DISASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE CYLINDER BOOT

   
   
   1. 

      *1	Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the 4 cylinder boots.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

2. REMOVE FRONT DISC BRAKE PISTON

   
   
   1. 

      *1	Wooden Block
      *a	30 mm (1.811 in.)

      Place a wooden block between the front disc brake pistons.

   2. Slowly apply compressed air to remove the 4 front disc brake pistons from the front disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the front disc brake pistons when applying compressed air.

      Note

      Do not spatter the brake fluid.

      Tech Tips

      If a front disc brake piston has been damaged, replace the front disc brake cylinder assembly with a new one.

   3. Remove the wooden block.

3. REMOVE PISTON SEAL

   
   
   1. 

      *1	Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the 4 piston seals from the front disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

   
   

   1. Remove the 2 front disc brake bleeder plug caps from the front disc brake bleeder plugs.

5. REMOVE FRONT DISC BRAKE BLEEDER PLUG

   
   

   1. Remove the 2 front disc brake bleeder plugs.