BRAKE ACTUATOR REASSEMBLY

PROCEDURE


  1. INSTALL BRAKE ACTUATOR DAMPER


    1. A004HJ2E01

      Install the 3 new brake actuator dampers (A and B) to the brake actuator bracket assembly.

  2. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY

    A004KWS

    1. Install the brake actuator bracket assembly to the brake actuator assembly with the 3 new nuts and 3 new washers.

      Note

      Do not remove the hole plugs of a new brake actuator assembly before connecting the brake lines because the brake actuator assembly is filled with brake fluid.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }