REAR STABILIZER BAR INSPECTION

PROCEDURE


  1. INSPECT STABILIZER LINK SUB-ASSEMBLY


    1. Inspect the state of rotation of the ball joint.


      1. Temporarily install the attaching nut to the stud of the rear stabilizer link assembly.

      2. A004I1Z

        Turn the stud back and forth.

        Standard
        There is no unusual resistance or play.

      3. If there is unusual resistance or play, replace the rear stabilizer link assembly with a new one.

    2. Inspect the dust cover.


      1. Check that the dust cover is not cracked and that there is no grease on it.

      2. If the dust cover is fissured or grease is leaked, replace the rear stabilizer link assembly with a new one.